XL-ListSwapBoutiqueTechHistoryNews
MY-XLRegisterContactRacingHarley Davidson Motorcycle InsuranceBlog

Re: decision

From: "Art Northrup, Jr." <art_njr@charter.net>
Subject: Re: decision
Reply-To: [Author] - [XL-List] - [All]
Date: Wed, 17 Mar 2010 19:30:35 -0400

Next Article (by Author): RE: sellng all my motorcycles - x-posted to several lists BLUESHOTTUB
Previous Article (by Author): Re: Stupid Newbie Question #1 "Art Northrup, Jr."
Top of Thread: decision "Colin Jorgenson"
Next in Thread: RE: decision BLUESHOTTUB
Articles sorted by: [Date] [Author] [Subject] 

> I have finally decided to have the 883 bored to a 1200.

> Any one that can think of any questions I should ask or concerns I should
> know of before the dude does the work?

Yep - are the cylinders (new or bored-out 883) going to be bored/honed on
torque plates, measuring from the new pistons & setting the piston-to-wall
clearance @ the piston manufacturer's recommendation?

- Art

Next Article (by Author): RE: sellng all my motorcycles - x-posted to several lists BLUESHOTTUB
Previous Article (by Author): Re: Stupid Newbie Question #1 "Art Northrup, Jr."
Top of Thread: decision "Colin Jorgenson"
Next in Thread: RE: decision BLUESHOTTUB
Articles sorted by: [Date] [Author] [Subject]

 
All text and images Copyright © 1995-2006 D. Mansfield. All rights reserved. Absolutely no reproduction allowed without prior permission from the author.  Disclaimer: This page is not associated with the Harley-Davidson Motor Company in any way other than a fondness of their products. Harley-Davidson, HD, Harley, and Sportster are among the trademarks and service marks of Harley-Davidson that may appear in this Web Site and that are registered in the United States and other countries.